The Bitmain Antminer Z15 connection issue with the mining pool will be resolved by this post.
Failure Phenomenon
Network Status and Mining Pool Status Are Both Abnormal.
Failure Causes and Treatment Methods:
- Mining machine configuration problems
Look for mistakes, such as spaces or symbols with a full or half angle, in the worker name of the mining pool. You can also reset it and restore it to factory settings. - Mining machine control board abnormal
You can try flashing a SD card or changing the control board. - Network abnormality
Typically, there are restrictions on the mining farm’s LAN or a port that is disabled, a DNS configuration error, etc. You can only try to contact the network operator to ask them to remove the restriction if the port has been restricted by the operator of the network. In this case, you can still access the Internet but cannot mine. - Abnormal mining pool
If network issues and mining machine configuration issues are excluded, the issue may be with the mining pool. To solve, either change the mining pool or get in touch with the relevant mining pool customer service.
Please don’t hesitate to get in touch with us if you have any questions.
